when i boot my computer after having run an update, my primary monitor (which should be at 1920x1080) is stuck at 640x480. interestingly, when i reboot and change nothing, it fixes itself until i run another update.
i’m on arch, using nvidia 555.58-2, on plasma 6.1.1-1. the monitor in question is DP-0 in the system info below.
what could be causing this and how can i fix it?
i’ve been having this issue for a while while kinda just dealing with it because it was something i could easily work around by booting my computer twice, but i’d really like to get it solved.
system info:
relevant (i think) inxi output
System:
Host: ***** Kernel: 6.9.7-arch1-1 arch: x86_64 bits: 64
Desktop: KDE Plasma v: 6.1.1 Distro: Arch Linux
Graphics:
Device-1: NVIDIA GP104 [GeForce GTX 1080] driver: nvidia v: 555.58
Device-2: EMEET HD Webcam C960 driver: snd-usb-audio,uvcvideo type: USB
Display: x11 server: X.Org v: 21.1.13 with: Xwayland v: 24.1.0 driver: X:
loaded: N/A failed: nvidia gpu: nvidia resolution: 1: 1920x1080
2: 1920x1080~60Hz 3: 1920x1080~60Hz
API: EGL v: 1.5 drivers: kms_swrast,nvidia,swrast
platforms: gbm,x11,surfaceless,device
API: OpenGL v: 4.6.0 compat-v: 4.5 vendor: nvidia mesa v: 555.58
renderer: NVIDIA GeForce GTX 1080/PCIe/SSE2
API: Vulkan v: 1.3.279 drivers: nvidia surfaces: xcb,xlib
xrandr from first boot
Screen 0: minimum 8 x 8, current 4480 x 1080, maximum 32767 x 32767
DVI-D-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+
1680x1050 59.95
1440x900 59.89
1280x1024 60.02
1280x800 59.81
1280x720 60.00
1152x864 75.00
1024x768 70.07 60.00
800x600 60.32 56.25
640x480 59.94
HDMI-0 connected primary 1920x1080+0+0 (normal left inverted right x axis y axis) 1600mm x 900mm
3840x2160 30.00 + 59.94 29.97 23.98
4096x2160 59.94 24.00
1920x1080 60.00* 59.94 29.97 23.98 60.00
1680x1050 59.95
1440x900 59.89
1280x1024 60.02
1280x960 60.00
1280x800 74.93 59.81
1280x768 59.87
1280x720 60.00 59.94 29.97 23.98
1024x768 60.00
800x600 60.32 56.25
720x480 59.94
640x480 59.94 59.93
DP-0 connected 640x480+3840+0 (normal left inverted right x axis y axis) 0mm x 0mm
640x480 59.94*+
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)
xrandr from the second boot
Screen 0: minimum 8 x 8, current 3840 x 1080, maximum 32767 x 32767
DVI-D-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 509mm x 286mm
1920x1080 60.00*+
1680x1050 59.95
1440x900 59.89
1280x1024 60.02
1280x800 59.81
1280x720 60.00
1152x864 75.00
1024x768 70.07 60.00
800x600 60.32 56.25
640x480 59.94
HDMI-0 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 1600mm x 900mm
3840x2160 30.00 + 59.94 29.97 23.98
4096x2160 59.94 24.00
1920x1080 60.00* 59.94 29.97 23.98 60.00
1680x1050 59.95
1440x900 59.89
1280x1024 60.02
1280x960 60.00
1280x800 74.93 59.81
1280x768 59.87
1280x720 60.00 59.94 29.97 23.98
1024x768 60.00
800x600 60.32 56.25
720x480 59.94
640x480 59.94 59.93
DP-0 connected primary 1920x1080+1920+0 (normal left inverted right x axis y axis) 531mm x 299mm
1920x1080 60.00 + 144.00* 119.98 99.93 59.94 50.00
1680x1050 59.88
1440x900 59.90
1280x1024 75.02 60.02
1280x720 60.00 59.94 50.00
1024x768 119.99 99.97 75.03 70.07 60.00
800x600 119.97 99.66 75.00 72.19 60.32 56.25
720x576 50.00
720x480 59.94
640x480 119.52 99.77 75.00 72.81 59.94 59.93
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)
DP-3 disconnected (normal left inverted right x axis y axis)
DP-4 disconnected (normal left inverted right x axis y axis)
DP-5 disconnected (normal left inverted right x axis y axis)
This may be a stupid question. But are you using grub and have nomodeset? Sometimes DE’s have problem with xorg setting monitor settings, which you then half to override somewhere in the init of the DE
–edit
Heres a work around.
"I have the same issue and have the following workaround:
It is possible to set the resolution from a command line using ‘xrandr’. Running just xrandr allows you to see the current resolution and the other valid resolutions.
From a command line you can run ‘xrandr -s 1024x768’ and the screen in VMware will reset to that size!
You can even set this at KDE startup by doing the following:
click KDE start icon
select System Settings
select Startup and Shutdown
click Add Program…
enter ‘xrandr -s 1024x768’ in the text box
be sure the “run in Terminal” checkbox is checked
follow the rest of the prompts to set it as a startup command.
The next time you log in, it will start at 800x600 but at the end of the login you will see the screen resize!
"
while i appreciate the effort, this has no effect on my issue. also maybe worth noting, i am using grub but not nomodeset. i toggled it on just to see if it would do anything but the problem persists.
if you look at my xrandr output on the first boot, the main problem is that it cannot see any other mode except 640x480 and running
xrandr --output DP-0 --mode 1920x1080fails. i cannot change it using plasma’s display settings gui or xrandr in any way - the only way i know how to get access to the other resolution/rate settings of that monitor is by rebooting.It kinda sounds like some kind of driver issue to me. The fact that it doesn’t detect modes other than a single super basic one sound like not having a proper graphics driver. However, I have no clue why it would work again on reboot and maybe even more importantly, why the other monitor does have a proper mode detected. I wouldn’t expect that if the driver was messed (you would expect all monitors to be assigned some basic mode).
Just a thought, and it seems less applicable to your situation given the software experience you’ve described, but I’ve had this happen to me with a faulty display cable. Have you tried a spare one?
that’s worth checking - i don’t have a spare DP cable on hand to test, but you may be onto something.
previously, i tried unplugging and replugging the cable on the PC end, as well as trying other ports, to no avail.
just now, i tried replugging the end plugged into the monitor a few times and was able to reproduce the resolution issue a single time. this honestly just confuses me more though, because why would it happen only one time out of several cycles doing the exact same thing?
i’m gonna get another cable just to be sure but that wont be for a few days at least.
in case anyone is reading this looking for a solution the cable was not the culprit
Just to double check, are you sure you’re not running TempleOS?
no unfortunately god’s intended resolution is just slippin right into my arch install uninvited
640x480 sounds like the typical fallback if there is no EDID/DDC data and the card is going ahead with the most bare-minimum signal that any screen should accept. Maybe there’s dumb state sitting around in the video card. Maybe, because everything is now so smart that it’s stupid, the monitor itself is the one remembering weird state. Maybe it doesn’t like the text-mode flip or a DPMS command at the end of an update-reboot cycle, so its EDID responder loses the plot. Who the removed knows what goes on in all this garbage firmware?
Do you have any other hardware between computer & monitor? (Ie a KVM Switch?)
The other post about display ID jogged my memory that KVMs (etc) don’t pass through the data (sometimes?), so just wondering whether there’s another factor here…
Not sure how it would only trigger this on updates, but just building a complete picture of the issue.
nothing in between the computer and monitor - it’s just plugged straight in. my current guess is that some step of pacman’s install/update process changes something that also gets changed by something else (DE, config file, idk) after the boot.
Bugged video driver
could you elaborate?
i’ve been just dealing with this problem for an embarrassing amount of time now, and have gone through several version updates of the nvidia drivers with this problem persisting. i’ve also tried reinstalling the nvidia drivers with no change.
Afraid you would have to contact nvidia for tech support
