![](https://lemmy.world/pictrs/image/d35cfb0f-dd8d-4628-aa78-5001d147653f.jpeg)
![](https://lemmy.world/pictrs/image/eb9cfeb5-4eb5-4b1b-a75c-8d9e04c3f856.png)
homebrew or bust
homebrew or bust
I see – I think I remember I got stuck at the chinese voice reboot loop on that one.
You probably were just viewing it in the Wyze app unless you did a bunch of stuff – I have a few old wyze cams and actually got one in RTSP mode and converted it to mjpeg once and it was pretty awful all around.
https://community.octoprint.org/t/usb-webcams-known-to-work-with-mjpg-streamer/21149
E: I acknowledge too that I need to move to Klipper – it’s definitely on the list .
new stream: https://www.youtube.com/watch?v=164_Z2udqsc
I didn’t check but the threads on the hotend are in good shape. It must have unscrewed itself. I think I can barely see some threads in the picture.
mostly out of the box one of these https://kingroon.com/products/official-kingroon-kp5l-3d-printer
PLA+Brass
I had just put it on hot earlier that day. I must not have tightened it fully I don’t have any other explanation.
Nope – right side is blob, left is nozzle
Zoom in – That is the nozzle itself on the print!!! lol
Just cropping / pinch to zoom
I have a Kasa camera mounted to the wall and and a Yi 4k plus streaming over a local RTMP server mounted to the top bracket for the top down view
I misread and thought this was a 40 meter benchy.
fair. I fully withdraw and concede
YHAOS