I don’t have any experience with resin printers yet but have been poking around at FDM for the better part of a decade. In that price range (for FDM), I’d likely suggest a Creality K1C. It is not going to likely match the BambuLab printers but it’s a great departure from previous by Creality, requiring little to no tinkering to make it work. If you can spare around $1k, and don’t care about proprietary stuff, BambuLab X1 series is about the most turnkey that I know of. But, again, the Creality is (surprisingly) right there too with the K1C.

Note: It is probably possible to get similar results with mods to a K1 or K1Max - the nozzle brush seems to be critical to the K1C’s reliability.

Yeah. That’s absolutely fair. I would honestly recommend BambuLab for about anyone looking for a turnkey solution (supposing that they have the funds). For me, it’s a primarily philosophical/personal thing.

I will say though that this new gen of printers is pretty incredible and getting to the point of nearly practical for non-3d printer enthusiasts. Even the K1C is remarkably functional out of the box. It didn’t need any mods to print accurately and reliability. The nozzle brush relocation mod, spool relocation mod, and full-fledged Klipper are not necessary - I just prefer textured PEI (no glue stick needed), easy spool changes, and the Mainsail UI (and customizability).

Something that I’ll also give BambuLab, beyond their slick AMS, is their inspiration of more work on forks of PrusaSlicer. I switched to OrcaSlicer with the new printer, after being on Cura forever and the use experience is absolutely incredible.

Not for now, thanks to some YouTubers getting them to reverse course slightly on some of their printers (to be fair, Creality took similar pressure). However, I have less trust in BambuLab at this time. That said, I’m not about to even try to claim that they’re bad printers. Plenty of data out there to say otherwise and their AMS is pretty slick.

I got a K1C a few months back and am buying but delighted with it. I came from a gen 1 Ender 3 with a warped bed. The only complaints that I’ve had are that the spool relocation included should include relocation of the runout sensor and the nozzle cleaner should not be part of the build plate (fixable with an easy mod).

Closed source firmware on a 3d printer is just a non-starter for me. Even if the printer were 10x or 100x better, I’m not dropping that kind of dough on something that will leave me screwed if the manufacturer decides to enremovedify or goes bankrupt.

For me, I think it’s just not ready for non-Debian distros yet. The docs and packages just aren’t up to parity. I like a lot about Incus and its general direction but libvirt and virt-manager are fully functional at the moment. Passing through devices with virt-manager is dead easy.

I’m still getting things set for Silverblue to be my baremetal hypervisor distro on my laptop. And by that, I mean giving up on Incus, setting up libvirt, and… everything is working like it should. I wasn’t expecting that. Now, I’ve got to find something else to do with my time.

Unrelated, good screenname :)

Oh, they do. There have been lawsuits. Why would the company want to lose a paying customer?

The main problem here: commercial dating apps are not intended to help people find partners or flings. They are intended to make the companies money. Some may initially be functional but enremovedification hits them fast, once they have a userbase established.

I just wanted to offer some nuance to the table. After everything has been learned, enabling some (otherwise complex and obscure) features can be accomplished by a single line in your NixOS config. Like, this efficiency can not and should not be ignored.

I really appreciate it. I really WANT to like NixOS. The level of efficiency and portability (ex. Nix as package manager) is incredible and, I think, well worth learning about both for users and distros - I hope we see the ideas propagate further. It’s just not in a place that I can be happy using it. But, it is going to tickle some people the right way and that is something that makes me happy.

Fedora Atomic does deliver on those without requiring you to go into the deep and learn an entire new language that’s only used for managing your distro 😅.

This right here is why I’m liking it so far. I’m like Alton Brown is to cooking gadgets when it comes to languages in computing, I really don’t like unitaskers. I get unreasonably resentful of software that forces me to use a DSL (this is a “me” problem).

Does it require you to climb through heaps of trash documentation? Absolutely.

That’s why I think the previous commenter’s statement rings true. I’ve been using Linux exclusively for over a decade across multiple distros. NixOS is not intuitive for new or seasoned users, making good documentation vital.

An example: I spent a good weekend day or so poking at NixOS. Live boot worked as expected. When I finished, I had a bootable system but no network stack, despite following the docs. This means that my only route forward would be going back to the live boot since there was no way to pull packages in that state.

I decided to go with Fedora Silverblue as my next test. After dding the image to my USB, it took about 10 mins to get up and running. I was able to setup libvirt and other similar software quick and easy. And once I’m happy, I can write my config to a repo and have my base system wherever, whenever.

And in 10Forward you’re absolutely brutal, keeping the comm in constant fear. You rule with an iron tentacle.

33 old? Nah. 30s are just the start of actual adulthood (as opposed to young adulthood).

Teamwork makes the dream work.

It may be worth checking to ensure that your repo mirrors are set to the best ones for your location. This can be done via the update manager.

This is even better than my answer.

IMO firewalld because it’s going to be more portable knowledge.

It also prevents use of education to enforce class divisions.

Part of that is because private education there is not a thing. So some of the funds that would go to for-profit education at the expense of public schools instead goes into taxes to more efficiently fund education.

You get it. That’s exactly what I advise to anyone wanting this feature. I’m not familiar enough to know if it’s something that I care about.