I need a very simple method for non-advanced users to share each other’s screen explicitly when they need help. They’re running XFCE on Manjaro and the machines involved are using Tailscale. Edit: SSH access is also available, with key authentication.

I need something super simple because they are remote from me and from each other and any graphical setup will have to be assisted sight-unseen over phone. So ideally just (1) install something (which I can do for them over SSH), (2) pick something from the Applications menu and maybe (3) press a big “START” button.

It’s also ok-ish if the remote capability is present all the time and I can connect without their explicit permission, but you can see why it would be best if they did something to enable it…

I’ve been looking for a solution but all I find is stuff that’s way too complicated OR starts a new desktop session instead of showing the current one.

Edited: to clarify I’m not the one who will be remoting-in and to mention SSH is available.

TIA

    • PeutMieuxFaire@kbin.social
      link
      fedilink
      arrow-up
      5
      ·
      1 year ago

      +1. I use it to help non-tech relatives. Apparently works on different OSes, including Android.
      Install, setup password, create icon on desktop and name it “Help me” - Done.

    • lemmyvore@feddit.nlOP
      link
      fedilink
      English
      arrow-up
      5
      arrow-down
      1
      ·
      edit-2
      1 year ago

      Rustdesk looks almost perfect, unfortunately they mandate using a complex password and the people who would be using this have trouble typing complex passwords. And complex passwords would not be necessary with direct IP connection over Tailscale. Looks like they don’t intend to relax these requirements. Such a pity. 🙁

      • ISOmorph@feddit.de
        link
        fedilink
        arrow-up
        4
        arrow-down
        1
        ·
        edit-2
        1 year ago

        You can set permanent passwords, that you can define yourself. Something like “Password1” shouldn’t be too hard for most people.

        EDIT: Also, now that I think about it, in your use case you would be the one entering the password. So your comment makes no sense…

        • lemmyvore@feddit.nlOP
          link
          fedilink
          English
          arrow-up
          4
          ·
          edit-2
          1 year ago

          I’m not the one that will be using either end and I’m also not on location with either machine.

          Further arguments against such arbitrary requirements have already been made by others in the discussion attached to the bug report so I won’t rehash them here.

          • Locrin@lemmy.world
            link
            fedilink
            arrow-up
            4
            ·
            1 year ago

            RustDesk looks extremely user friendly and simple. If this is beyond the targeted users consider that this task may be beyond their capabilities.

        • PeutMieuxFaire@kbin.social
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          Yup: write down the password when you set up the software and feed it to your “own” RustDesk on your computer.
          Although I recently had a case where the password on the remote machine seemed to have changed by its own, but it could be me or the machine owner who did something funny without noticing.

      • rambos@lemm.ee
        link
        fedilink
        arrow-up
        2
        ·
        1 year ago

        You can make simple password and you can also save the password so no need to retype. Anydesk can also be used with no password, the other side have to press accept. Probably rustdesk can do that as well, but didnt try

        • lemmyvore@feddit.nlOP
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          1 year ago

          That would have been very helpful but no, it doesn’t support that.

          And another issue is that it doesn’t let you enter the Tailscale machine name for the remote end, it thinks it’s one of its own IDs and gets confused. You can work around this by entering the Tailscale IP address but those can change.

  • PerogiBoi@lemmy.ca
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    DW Service! Set it up once and then the client doesn’t even need to type a password to share their screen as you can log into their computer remotely to help out. Open source as well.

  • unknowing8343@discuss.tchncs.de
    link
    fedilink
    arrow-up
    7
    ·
    edit-2
    1 year ago

    Not open source, but AnyDesk is another option that does exactly what you want.

    There was a Flatpak, but the maintainer quit, so, you’ll probably have to install it directly from their official site.

    Anyway, RustDesk, as mentioned by other comment, is essentially the open source alternative to AnyDesk, so maybe look into that first.

  • tvcvt@lemmy.ml
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    Another option that’s pretty much perfect as long as you don’t need to provide remote support for macs is Remotely (https://github.com/immense/Remotely). You can selfhost it and it works kind of like teamviewer, so pretty simple from the client standpoint.

    • Chewy@discuss.tchncs.de
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      VNC doesn’t work well with high latency (e.g. remote support). It also isn’t secure so it has to be encrypted (e.g. through wireguard or ssh port forwarding).

      Using something like RustDesk is easier to set up. A nightly build even works on Wayland (with some caveats).

  • Kbobabob@lemmy.world
    link
    fedilink
    arrow-up
    2
    arrow-down
    9
    ·
    1 year ago

    Honestly it’s simple things like this that keep people from using Linux, myself included. I even run some servers on Linux and it’s always a struggle to get anything done.

    • azuth@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      8
      ·
      1 year ago

      Pretty sure most people on windows do remote screen sharing via teamviewer or anydesk or discord. All of which exist for Linux.

    • NeoNachtwaechter@lemmy.world
      link
      fedilink
      arrow-up
      2
      arrow-down
      1
      ·
      1 year ago

      Learn to setup headless servers :-)

      I don’t ever do anything else, even though I could easily use graphical remote desks too.