Roman0@lemmy.shtuf.eu to 3DPrinting@lemmy.worldEnglish · 6 months agoOrcaSlicer V2.1.0 Official Releasegithub.comexternal-linkmessage-square27fedilinkarrow-up176arrow-down11
arrow-up175arrow-down1external-linkOrcaSlicer V2.1.0 Official Releasegithub.comRoman0@lemmy.shtuf.eu to 3DPrinting@lemmy.worldEnglish · 6 months agomessage-square27fedilink
minus-squarexenspidey@lemmy.ziplinkfedilinkEnglisharrow-up7·edit-26 months agoAnd it’s fantastic! Edit: its actually a fork of bamboo slicer which is a fork of prusa slicer
minus-squareGrayBackgroundMusic@lemm.eeMlinkfedilinkEnglisharrow-up4·6 months agoFork of a fork of a fork.
minus-squarexenspidey@lemmy.ziplinkfedilinkEnglisharrow-up2·6 months agoThe beauty of open source software
minus-squarezelifcam@lemmy.worldlinkfedilinkEnglisharrow-up2arrow-down1·edit-26 months agoWhat are the advantages over Prusa? Ease of use or features? Both?
minus-squarexenspidey@lemmy.ziplinkfedilinkEnglisharrow-up2·6 months agoI’d say all of the above. Its integration with Kipper is also very good
And it’s fantastic!
Edit: its actually a fork of bamboo slicer which is a fork of prusa slicer
Fork of a fork of a fork.
The beauty of open source software
What are the advantages over Prusa?
Ease of use or features? Both?
I’d say all of the above. Its integration with Kipper is also very good